The outlet spout for the cornice box gutter
Roofs without overhangs are increasingly characterising the appearance of new buildings. In roof constructions of this type, the drainage is often planned on the brickwork or an artificial cornice. To ensure that the cornice gutter – usually in the form of a box gutter – drains perfectly, both functionally and visually, there is now a connector specially developed for this type of gutter.
put an end to elaborate customised creations
With its extremely low installation height, the spout fits over almost any cornice. The pipe diameter of 75 or 110 mm in conjunction with the maximum free pipe cross-section ensures excellent drainage values.
Effortless installation
The connection piece is simply soldered in between two cornice gutters and the overlap of the gutter edging is concealed by the bead trim supplied.
The connection to the downpipe is ideally made using GRÖMO flat-roof branches for round or box-shaped downpipes. It is attached to the free end of the connecting pipe and connected to the downpipe. The distance from the wall can be individually adjusted by shortening the connecting pipe and thus adapted to the structural conditions.
Versions
The outlet spout for the cornice box gutter in zinc is available in sizes 280/75 and 333/110.